// CDialog3DScriptDrawingBoard.cpp : 实现文件
//

#include "stdafx.h"
#include "GeoMative.h"
#include "CDialog3DScriptDrawingBoard.h"
#include "afxdialogex.h"


// CDialog3DScriptDrawingBoard 对话框

IMPLEMENT_DYNAMIC(CDialog3DScriptDrawingBoard, CDialog)

CDialog3DScriptDrawingBoard::CDialog3DScriptDrawingBoard(CWnd* pParent /*=NULL*/)
	: CDialog(CDialog3DScriptDrawingBoard::IDD, pParent)
{
	m_bZOrder = FALSE;
}

CDialog3DScriptDrawingBoard::~CDialog3DScriptDrawingBoard()
{
}

void CDialog3DScriptDrawingBoard::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
}

CDialog3DScriptDrawingBoard* CDialog3DScriptDrawingBoard::GetInstance()
{
	static CDialog3DScriptDrawingBoard dlgDrawingBoard;
	return &dlgDrawingBoard;
}

BEGIN_MESSAGE_MAP(CDialog3DScriptDrawingBoard, CDialog)
	ON_WM_PAINT()
END_MESSAGE_MAP()


// CDialog3DScriptDrawingBoard 消息处理程序
BOOL CDialog3DScriptDrawingBoard::OnInitDialog()
{
	CDialog::OnInitDialog();

	// TODO:  在此添加额外的初始化
	m_uiXElecNumber = 0;
	m_uiYElecNumber = 0;
	return TRUE;  // return TRUE unless you set the focus to a control
	// 异常:  OCX 属性页应返回 FALSE
}


void CDialog3DScriptDrawingBoard::OnPaint()
{
	CPaintDC dc(this); // device context for painting
	// TODO:  在此处添加消息处理程序代码
	// 不为绘图消息调用 CDialogEx::OnPaint()
	CRect rcWnd;
	GetParent()->GetClientRect(&rcWnd);
	dc.FillSolidRect(rcWnd, RGB(255, 255, 255));

	CRect rcBrush;
	rcBrush.left = rcWnd.left + 50;
	rcBrush.right = rcWnd.right - 50;
	rcBrush.top = rcWnd.top + 50;
	rcBrush.bottom = rcWnd.bottom - 50;

	//实心圆
	CBrush cBlackBrush;
	cBlackBrush.CreateSolidBrush(RGB(0, 0, 0));
	dc.SelectObject(cBlackBrush);
	CPen pen;
	pen.CreatePen(PS_SOLID, 1, RGB(0, 0, 0));
	dc.SelectObject(pen);
	float iCellWidth = (rcBrush.right - rcBrush.left)*1.0 / (m_uiXElecNumber*CIRCLE_DIAMETER*1.0);
	float iCellHeight = (rcBrush.bottom - rcBrush.top)*1.0 / (m_uiYElecNumber * CIRCLE_DIAMETER*1.0);
 	float iStartXPoint = (rcBrush.right - rcBrush.left) / 2 - ((iCellWidth+CIRCLE_DIAMETER)*m_uiXElecNumber / 2);
	float iStartYPoint = (rcBrush.bottom - rcBrush.top) / 2 - ((iCellHeight + CIRCLE_DIAMETER)*m_uiYElecNumber / 2);
	if (iStartXPoint < 0)
	{
		iStartXPoint = 30;
	}
	if (iStartYPoint < 0)
	{
		iStartYPoint = 5;
	}
	float iCurStartXPoint = 0;
	float iCurStartYPoint = 0;
	int i = 0, j = 0;

	//绘制X、Y标志以及刻度
	if (m_uiXElecNumber > 0 && m_uiYElecNumber > 0)
	{
		RECT rc;
		CString strText;
		//绘制X轴方向刻度
		/*for (i = 0; i < DIAL_NUMBER; i++)
		{
			//rc.left = iStartXPoint + i*(m_uiYElecNumber * (iCellHeight + CIRCLE_DIAMETER) / (DIAL_NUMBER - 1));
			//rc.left = iStartXPoint + i*m_fXElecDistance*m_uiXElecNumber / (DIAL_NUMBER - 1);
			rc.left = iStartXPoint + i*(iCellWidth-CIRCLE_DIAMETER)*m_uiXElecNumber / (DIAL_NUMBER - 1);
			rc.right = rc.left + 50; 
			rc.top = iStartYPoint + (m_uiYElecNumber - 1) * (iCellHeight + CIRCLE_DIAMETER) + CIRCLE_DIAMETER;
			rc.bottom = rc.top + 20;
			if (0 == i)
			{
				dc.DrawText(_T("0.0"), &rc, DT_WORDBREAK | DT_TOP|DT_LEFT);
			}
			else
			{
				strText.Format(_T("%.1f"), i*m_fXElecDistance*m_uiXElecNumber/(DIAL_NUMBER-1));
				dc.DrawText(strText, &rc, DT_WORDBREAK | DT_TOP | DT_LEFT);
			}
		}*/
		rc.left = iStartXPoint-5;
		rc.right = rc.left + 50;
		rc.top = iStartYPoint + (m_uiYElecNumber - 1) * (iCellHeight + CIRCLE_DIAMETER) + CIRCLE_DIAMETER;
		rc.bottom = rc.top + 20;
		dc.DrawText(_T("0.0"), &rc, DT_WORDBREAK | DT_TOP | DT_LEFT);

		//绘制X标志	
		rc.left = (rcBrush.right - rcBrush.left) / 2 - 10;
		rc.right = rc.left + 20;
		rc.top = iStartYPoint + (m_uiYElecNumber - 1) * (iCellHeight + CIRCLE_DIAMETER) + 10;
		rc.bottom = rc.top + 20;
		dc.DrawText(_T("X"), &rc, DT_WORDBREAK | DT_TOP);

		//绘制Y方向刻度
		/*for (i = 0; i < DIAL_NUMBER; i++)
		{
			rc.left = iStartXPoint - 40;
			rc.right = rc.left + 40 - CIRCLE_DIAMETER;
			//rc.top = iStartYPoint + i*(m_uiYElecNumber)* (iCellHeight + CIRCLE_DIAMETER) / (DIAL_NUMBER - 1);
			rc.top = iStartYPoint + (DIAL_NUMBER - i - 1)*(iCellHeight - CIRCLE_DIAMETER)*m_uiYElecNumber / (DIAL_NUMBER - 1);
			rc.bottom = rc.top + 20;
			//strText.Format(_T("%.1f"), (DIAL_NUMBER - i - 1)*(m_uiYElecNumber * (iCellHeight + CIRCLE_DIAMETER) / (DIAL_NUMBER - 1)));
			if (DIAL_NUMBER-1 == i)
			{
				dc.DrawText(_T("0.0"), &rc, DT_WORDBREAK | DT_RIGHT);
			}
			else
			{
				strText.Format(_T("%.1f"), (DIAL_NUMBER-i-1)*m_fYElecDistance*m_uiYElecNumber / (DIAL_NUMBER - 1));
				dc.DrawText(strText, &rc, DT_WORDBREAK | DT_RIGHT);
			}			
		}*/



		//绘制Y标志
		rc.right = iStartXPoint - 10;
		rc.left = rc.right - 20;
		rc.top = iStartYPoint + (m_uiYElecNumber * (iCellHeight + CIRCLE_DIAMETER)) / 2 - 10;
		//rc.top = iStartYPoint + (DIAL_NUMBER - i - 1)*(iCellHeight - CIRCLE_DIAMETER)*m_uiYElecNumber / (DIAL_NUMBER - 1);
		rc.bottom = rc.top + 20;
		dc.DrawText(_T("Y"), &rc, DT_WORDBREAK | DT_RIGHT);
	}  

	CString strLog;
	strLog.Format(_T("总宽%d，总高%d,iCellWidth=%f,iCellHeight=%f,iStartXPoint=%f,iStartYPoint=%f\n"), rcBrush.right - rcBrush.left, rcBrush.bottom - rcBrush.top, iCellWidth, iCellHeight, iStartXPoint, iStartYPoint);
 	OutputDebugString(strLog);

	//非Z序排列
	if (!m_bZOrder)
	{
		for (i = 0; i < m_uiXElecNumber; i++)
		{
			for (j = 0; j < m_uiYElecNumber; j++)
			{
				iCurStartXPoint = iStartXPoint + i * (iCellWidth + CIRCLE_DIAMETER);
				iCurStartYPoint = iStartYPoint + j * (iCellHeight + CIRCLE_DIAMETER);
				strLog.Format(_T("left=%f,top=%f,right=%f,bottom=%f\n"), iStartXPoint + i * iCellWidth, iStartYPoint + j * iCellHeight, iStartXPoint + i * iCellWidth + CIRCLE_DIAMETER, iStartYPoint + j * iCellHeight + CIRCLE_DIAMETER);
				OutputDebugString(strLog);
				dc.Ellipse(iCurStartXPoint, iCurStartYPoint, iCurStartXPoint + CIRCLE_DIAMETER, iCurStartYPoint + CIRCLE_DIAMETER);

				switch (m_enCableDirectionType)
				{
				case EN_CABLE_X_DIRECTION://电缆X方向
				{
					if (i != m_uiXElecNumber - 1)
					{
						dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER, iCurStartYPoint + CIRCLE_DIAMETER / 2);
						dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER + iCellWidth, iCurStartYPoint + CIRCLE_DIAMETER / 2);
					}

					//第一列
					if (i == 0 && j != m_uiYElecNumber - 1)
					{
						if (m_uiYElecNumber % 2 == 0)
						{
							if (j % 2 == 1)
							{
								dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER);
								dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
							}
						}
						else
						{
							if (j % 2 == 0)
							{
								dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER);
								dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
							}
						}
					}
					//最后一列
					else if (i == m_uiXElecNumber - 1)
					{
						if (m_uiYElecNumber % 2 == 0)
						{
							if (j % 2 == 0)
							{
								dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER);
								dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
							}
						}
						else
						{
							if (j % 2 == 1)
							{
								dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER);
								dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
							}
						}
					}
				}
				break;
				case EN_CABLE_Y_DIRECTION://电缆Y方向
				{
					if (j != m_uiYElecNumber - 1)
					{
						dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint);
						dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
					}

					//第一行
					if (j == 0 && i != m_uiXElecNumber - 1)
					{
						if (i % 2 == 0)
						{
							dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER / 2);
							dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER + iCellWidth, iCurStartYPoint + CIRCLE_DIAMETER / 2);
						}
					}
					//最后一行
					else if ((j == m_uiYElecNumber - 1) && (i != m_uiXElecNumber - 1))
					{
						if (i % 2 == 1)
						{
							dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER / 2);
							dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER + iCellWidth, iCurStartYPoint + CIRCLE_DIAMETER / 2);
						}
					}
				}
				break;
				default:
					break;
				}
			}
		}
	}
	//Z序排列
	else
	{
		for (i = 0; i < m_uiXElecNumber; i++)
		{
			for (j = 0; j < m_uiYElecNumber; j++)
			{
				iCurStartXPoint = iStartXPoint + i * (iCellWidth + CIRCLE_DIAMETER);
				iCurStartYPoint = iStartYPoint + j * (iCellHeight + CIRCLE_DIAMETER);
				strLog.Format(_T("left=%f,top=%f,right=%f,bottom=%f\n"), iStartXPoint + i * iCellWidth, iStartYPoint + j * iCellHeight, iStartXPoint + i * iCellWidth + CIRCLE_DIAMETER, iStartYPoint + j * iCellHeight + CIRCLE_DIAMETER);
				OutputDebugString(strLog);
				dc.Ellipse(iCurStartXPoint, iCurStartYPoint, iCurStartXPoint + CIRCLE_DIAMETER, iCurStartYPoint + CIRCLE_DIAMETER);

				switch (m_enCableDirectionType)
				{
				case EN_CABLE_X_DIRECTION://电缆X方向
				{
					if (i != m_uiXElecNumber - 1)
					{
						dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER, iCurStartYPoint + CIRCLE_DIAMETER / 2);
						dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER + iCellWidth, iCurStartYPoint + CIRCLE_DIAMETER / 2);
					}
					//最后一列
					else
					{
						if (j != m_uiYElecNumber - 1)
						{
							dc.MoveTo(iStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER);
							dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
						}
					}
				}
				break;
				case EN_CABLE_Y_DIRECTION://电缆Y方向
				{
					if (j != m_uiYElecNumber - 1)
					{
						dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint);
						dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iCurStartYPoint + CIRCLE_DIAMETER + iCellHeight);
					}
					//第一行
					else
					{
						if (i != m_uiXElecNumber - 1)
						{
							dc.MoveTo(iCurStartXPoint + CIRCLE_DIAMETER / 2, iStartYPoint + CIRCLE_DIAMETER / 2);
							dc.LineTo(iCurStartXPoint + CIRCLE_DIAMETER + iCellWidth, iStartYPoint + (m_uiYElecNumber - 1)*(iCellHeight + CIRCLE_DIAMETER) + CIRCLE_DIAMETER / 2);
						}
					}
				}
				break;
				default:
					break;
				}
			}
		}
	}
}