// D:\zm\GeomativeV2.5\cpp\logging\CDialogLoggingParameterSetting.cpp : 实现文件
//

#include "stdafx.h"
#include "GeoMative.h"
#include "logging\CDialogLoggingParameterSetting.h"
#include "afxdialogex.h"

#define  LOGGING_MESSAGEBOX_TITLE _T("CDialogLoggingParameterSetting")
// CDialogLoggingParameterSetting 对话框

IMPLEMENT_DYNAMIC(CDialogLoggingParameterSetting, CDialog)

CDialogLoggingParameterSetting::CDialogLoggingParameterSetting(CWnd* pParent /*=NULL*/)
	: CDialog(CDialogLoggingParameterSetting::IDD, pParent)
{

}

CDialogLoggingParameterSetting::~CDialogLoggingParameterSetting()
{
}

void CDialogLoggingParameterSetting::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_COMBO_TASK_NAME_LIST, m_comTaskList);
	DDX_Control(pDX, IDC_COMBO_WAVEFORM, m_comWaveform);
	DDX_Control(pDX, IDC_COMBO_LOGGING_DIRECTION, m_comLoggingDirection);
}


BEGIN_MESSAGE_MAP(CDialogLoggingParameterSetting, CDialog)
	ON_BN_CLICKED(IDOK, &CDialogLoggingParameterSetting::OnBnClickedOk)
	ON_BN_CLICKED(IDCANCEL, &CDialogLoggingParameterSetting::OnBnClickedCancel)
	ON_CBN_SELCHANGE(IDC_COMBO_TASK_NAME_LIST, &CDialogLoggingParameterSetting::OnCbnSelchangeComboTaskNameList)
END_MESSAGE_MAP()

BOOL CDialogLoggingParameterSetting::OnInitDialog()
{
	CDialog::OnInitDialog();
	GetDlgItem(IDC_EDIT_TRACE)->SetWindowTextA(_T("0"));
	m_comWaveform.AddString(_T("0+0-"));
	m_comWaveform.SetCurSel(0);
	
	if (LANG_ZHCN == g_iUILanguage)
	{
		SetWindowTextA(_T("测量参数设置"));
		GetDlgItem(IDC_STATIC_TASK_NAME)->SetWindowTextA(_T("任务名*："));
		GetDlgItem(IDC_STATIC_TEST_LOCATION)->SetWindowTextA(_T("测试地点："));
		GetDlgItem(IDC_STATIC)->SetWindowTextA(_T("测井类型*"));
		GetDlgItem(IDC_CHECK_LONG_POTENTIAL_LOG)->SetWindowTextA(_T("长电位测井"));
		GetDlgItem(IDC_CHECK_SHORT_POTENTIAL_LOG)->SetWindowTextA(_T("短电位测井"));
		GetDlgItem(IDC_CHECK_GRADIENT_LOG)->SetWindowTextA(_T("梯度测井"));
		GetDlgItem(IDC_CHECK_SP_LOG)->SetWindowTextA(_T("SP测井"));
		GetDlgItem(IDC_STATIC_TRACE)->SetWindowTextA(_T("迭代次数："));
		GetDlgItem(IDC_STATIC_WAVEFORM)->SetWindowTextA(_T("发射波形："));
		GetDlgItem(IDC_STATIC_SAMPLING_INTERVAL)->SetWindowTextA(_T("采样间隔："));
		GetDlgItem(IDC_STATIC_INITIAL_DEPTH)->SetWindowTextA(_T("初始深度*："));
		GetDlgItem(IDC_STATIC_END_DEPTH)->SetWindowTextA(_T("结束深度*："));
		GetDlgItem(IDC_STATIC_LOGGING_DIRECTION)->SetWindowTextA(_T("测井方向*："));
		GetDlgItem(IDC_STATIC_LOGGING_INTERVAL)->SetWindowTextA(_T("测井间隔*："));
		GetDlgItem(IDC_STATIC_INSTRUMENT_ZERO_LENGTH)->SetWindowTextA(_T("仪器零长*："));
		GetDlgItem(IDC_STATIC_PERIOD)->SetWindowTextA(_T("周期*："));
		GetDlgItem(IDOK)->SetWindowTextA(_T("确定"));
		GetDlgItem(IDCANCEL)->SetWindowTextA(_T("取消"));

		m_comLoggingDirection.AddString(_T("向上"));
		m_comLoggingDirection.AddString(_T("向下"));
	}
	else
	{
		m_comLoggingDirection.AddString(_T("up"));
		m_comLoggingDirection.AddString(_T("down"));
	}
	m_comLoggingDirection.SetCurSel(0);
	// TODO:  在此添加额外的初始化
	m_mapTaskList = CLoggingDataOper::GetInstance()->QueryTaskListFromDB();
	if (m_mapTaskList.size() > 0)
	{
		map<CString, STLoggingTaskInfo>::iterator iter = m_mapTaskList.begin();
		for (; iter != m_mapTaskList.end(); iter++)
		{
			m_comTaskList.AddString(iter->second.szTaskName);
		}
	}
	m_comTaskList.SetCurSel(0);

	return TRUE;  // return TRUE unless you set the focus to a control
	// 异常:  OCX 属性页应返回 FALSE
}

void CDialogLoggingParameterSetting::OnCbnSelchangeComboTaskNameList()
{
	// TODO:  在此添加控件通知处理程序代码
	int iCurSel = m_comTaskList.GetCurSel();
	CString strTaskName;
	m_comTaskList.GetLBText(iCurSel, strTaskName);
	if (strTaskName.IsEmpty())
	{
		return;
	}
	CString strText;
	STLoggingTaskInfo stLoggingInfo = CLoggingDataOper::GetInstance()->QueryTaskInfoByName(strTaskName);
	GetDlgItem(IDC_EDIT_TEST_LOCATION)->SetWindowTextA(stLoggingInfo.szLocation);
	//工作模式
	if ((stLoggingInfo.byLogType & 0x01) == 0x01)
	{
		((CButton*)GetDlgItem(IDC_CHECK_SP_LOG))->SetCheck(TRUE);
	}
	else
	{
		((CButton*)GetDlgItem(IDC_CHECK_SP_LOG))->SetCheck(FALSE);
	}
	if ((stLoggingInfo.byLogType & 0x02) == 0x02)
	{
		((CButton*)GetDlgItem(IDC_CHECK_LONG_POTENTIAL_LOG))->SetCheck(TRUE);
	}
	else
	{
		((CButton*)GetDlgItem(IDC_CHECK_LONG_POTENTIAL_LOG))->SetCheck(FALSE);
	}
	if ((stLoggingInfo.byLogType & 0x04) == 0x04)
	{
		((CButton*)GetDlgItem(IDC_CHECK_SHORT_POTENTIAL_LOG))->SetCheck(TRUE);
	}
	else
	{
		((CButton*)GetDlgItem(IDC_CHECK_SHORT_POTENTIAL_LOG))->SetCheck(FALSE);
	}
	if ((stLoggingInfo.byLogType & 0x08) == 0x08)
	{
		((CButton*)GetDlgItem(IDC_CHECK_GRADIENT_LOG))->SetCheck(TRUE);
	}
	else
	{
		((CButton*)GetDlgItem(IDC_CHECK_GRADIENT_LOG))->SetCheck(FALSE);
	}

	strText.Empty();
	strText.Format(_T("%d"), stLoggingInfo.byTrace);
	GetDlgItem(IDC_EDIT_TRACE)->SetWindowTextA(strText);
	
	m_comWaveform.SetCurSel(iCurSel);
	
	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fSamplingInterval);
	GetDlgItem(IDC_EDIT_SAMPLING_INTERVAL)->SetWindowTextA(strText);

	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fInitDepth);
	GetDlgItem(IDC_EDIT_INITIAL_DEPTH)->SetWindowTextA(strText);

	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fEndDepth);
	GetDlgItem(IDC_EDIT_END_DEPTH)->SetWindowTextA(strText);

	m_comLoggingDirection.SetCurSel(stLoggingInfo.byLogDirection);

	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fLoggingDistance);
	GetDlgItem(IDC_EDIT_LOGGING_INTERVAL)->SetWindowTextA(strText);

	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fInstrumentZeroLength);
	GetDlgItem(IDC_EDIT_INSTRUMENT_ZERO_LENGTH)->SetWindowTextA(strText);

	strText.Empty();
	strText.Format(_T("%.2f"), stLoggingInfo.fPeriod);
	GetDlgItem(IDC_EDIT_PERIOD)->SetWindowTextA(strText);
}

// CDialogLoggingParameterSetting 消息处理程序
void CDialogLoggingParameterSetting::OnBnClickedOk()
{
	// TODO:  在此添加控件通知处理程序代码
	CString strTaskName;
	int iCurSel = m_comTaskList.GetCurSel();
	m_comTaskList.GetLBText(iCurSel, strTaskName);
	if (strTaskName.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("任务名不能为空"));
		else
			MessageBoxEx(NULL, _T("Task name cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strTestLocation;
	GetDlgItem(IDC_EDIT_TEST_LOCATION)->GetWindowTextA(strTestLocation);

	BYTE byLogTypes = 0;
	int iTemp = -1;
	iTemp = ((CButton*)GetDlgItem(IDC_CHECK_SP_LOG))->GetCheck();
	if (iTemp > 0)
	{
		byLogTypes |= 1;
	}
	iTemp = ((CButton*)GetDlgItem(IDC_CHECK_LONG_POTENTIAL_LOG))->GetCheck();
	if (iTemp > 0)
	{
		byLogTypes |= 2;
	}
	iTemp = ((CButton*)GetDlgItem(IDC_CHECK_SHORT_POTENTIAL_LOG))->GetCheck();
	if (iTemp > 0)
	{
		byLogTypes |= 4;
	}
	iTemp = ((CButton*)GetDlgItem(IDC_CHECK_GRADIENT_LOG))->GetCheck();
	if (iTemp > 0)
	{
		byLogTypes |= 8;
	}

	if (byLogTypes <= 0)
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("请选择测井类型"));
		else
			MessageBoxEx(NULL, _T("Please select the logging type"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strTrace;
	GetDlgItem(IDC_EDIT_TRACE)->GetWindowTextA(strTrace);
	if (strTrace.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("迭代次数不能为空"));
		else
			MessageBoxEx(NULL, _T("Number of iterations cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	int iWaveform = m_comWaveform.GetCurSel();
	if (iWaveform < 0)
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("请选择发射波形"));
		else
			MessageBoxEx(NULL, _T("Please select the launch waveform"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strSamplingInterval;
	GetDlgItem(IDC_EDIT_SAMPLING_INTERVAL)->GetWindowTextA(strSamplingInterval);
	if (strSamplingInterval.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("采样间隔不能为空"));
		else
			MessageBoxEx(NULL, _T("Sampling interval must not be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strInitialDepth;
	GetDlgItem(IDC_EDIT_INITIAL_DEPTH)->GetWindowTextA(strInitialDepth);
	if (strInitialDepth.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("初始深度不能为空"));
		else
			MessageBoxEx(NULL, _T("Initial depth cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strEndDepth;
	GetDlgItem(IDC_EDIT_END_DEPTH)->GetWindowTextA(strEndDepth);
	if (strEndDepth.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("结束深度不能为空"));
		else
			MessageBoxEx(NULL, _T("End depth cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	int iLogDir = m_comLoggingDirection.GetCurSel();
	if (iLogDir < 0)
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("请选择测井方向"));
		else
			MessageBoxEx(NULL, _T("Please select the logging direction"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strLoggingInterval;
	GetDlgItem(IDC_EDIT_LOGGING_INTERVAL)->GetWindowTextA(strLoggingInterval);
	if (strLoggingInterval.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("测井间隔不能为空"));
		else
			MessageBoxEx(NULL, _T("Log interval must not be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strInstrumentZeroLength;
	GetDlgItem(IDC_EDIT_INSTRUMENT_ZERO_LENGTH)->GetWindowTextA(strInstrumentZeroLength);
	if (strInstrumentZeroLength.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("仪器零长不能为空"));
		else
			MessageBoxEx(NULL, _T("Instrument zero length cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	CString strPeriod;
	GetDlgItem(IDC_EDIT_PERIOD)->GetWindowTextA(strPeriod);
	if (strPeriod.IsEmpty())
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("周期不能为空"));
		else
			MessageBoxEx(NULL, _T("Period cannot be empty"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
		return;
	}

	//将数据希尔
	BOOL bRes = CLoggingDataOper::GetInstance()->UpdateTaskInfoIntoDB(strTaskName, strTestLocation, byLogTypes, strTrace, iWaveform, strSamplingInterval, strInitialDepth, strEndDepth, iLogDir, strLoggingInterval, strInstrumentZeroLength, strPeriod);
	if (bRes)
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("修改任务信息成功"));
		else
			MessageBoxEx(NULL, _T("Update task information successful"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
	}
	else
	{
		if (LANG_ZHCN == g_iUILanguage)
			AfxMessageBox(_T("修改任务信息失败"));
		else
			MessageBoxEx(NULL, _T("Update task information failed"), LOGGING_MESSAGEBOX_TITLE, MB_OK, MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US));
	}
	m_stLoggingParam.byLogTypes = byLogTypes;
	m_stLoggingParam.byLogDirection = iLogDir;
	m_stLoggingParam.fSamplingInterval = atof(strSamplingInterval);
	m_stLoggingParam.fDepth = atof(strEndDepth) - atof(strInitialDepth);
	m_stLoggingParam.fLoggingDistance = atof(strLoggingInterval);
	m_stLoggingParam.fPeriod = atof(strPeriod);
	CDialog::OnOK();
}


void CDialogLoggingParameterSetting::OnBnClickedCancel()
{
	// TODO:  在此添加控件通知处理程序代码
	CDialog::OnCancel();
}

STLoggingParamSettingReq CDialogLoggingParameterSetting::GetLogParamSetting()
{
	return m_stLoggingParam;
}